BFQQF - MOLYSULFIDE (MOLYBDENUM DISULFIDE)
- MSDS: BFQQF
- Manufacturer: CHEMICAL COMMODITIES AGENCY INC
- Product Name: MOLYSULFIDE (MOLYBDENUM DISULFIDE)
- National Stock Number: 6810-00-816-1025
Product Identification
Product ID:MOLYSULFIDE (MOLYBDENUM DISULFIDE)
MSDS Date:01/01/1987
FSC:6810
NIIN:00-816-1025
MSDS Number: BFQQF
Responsible Party
Emergency Phone: (714)864-2310
Cage: 60777
Contractor
Telephone: 909-864-2310
Cage: 60777
Ingredients
MOLYBDENUM DISULFIDE
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 100%
OSHA PEL 10 MG/M3 TDUST (MO)
ACGIH TLV: 10 MG/M3 (MO); 8990
Hazards
Effects of Overexposure:NO REPORTABLE ILL EFFECTS IN WORKERS EXPOSED TO
DUST.MAY IRRITATE EYES,SKIN AND RESPIRATORY TRACT.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER SPRAY
Fire Fighting Procedures:USE SCBA IN FIRES AND CONFINED AREA
Unusual Fire/Explosion Hazard:NONE SPECIFIED. COMBUSTION OF THIS
MATERIAL WILL PRODUCE SO*2
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION.USE A VACUUM
SYSTEM TO CLEAN UP SPILLS,RECOVER FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY AND WELL VENTILATED
AREA.KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.DO NOT BREATHE DUST.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR DUST IF ABOVE
TLV.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:U/K
Vapor Pres:U/K
Vapor Density:U/K
Spec Gravity:4.80
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE-GRAY TO BLACK,CRYSTALLINE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:COMBUSTION MAY GIVE SO*2
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.